🇺🇸🇺🇲 Free Shipping within the US on all items in the store (excluding Al ferrules) & Free USPS Priority shipping on orders $100 and over within the US. 🇨🇦🇲🇽Free Shipping on orders $175 USD and over to Canada and Mexico. 🇺🇸🇺🇲 Free Shipping within the US on all items in the store (excluding Al ferrules) & Free USPS Priority shipping on orders $100 and over within the US. 🇨🇦🇲🇽Free Shipping on orders $175 USD and over to Canada and Mexico.
Contact
paige@bbandfco.com

Geoffrey

$10.00

2-4 days delivery

Base Ring

X NCW Putters/3DP

Giraffe Print pattern. 

Sold as Individual pieces. 

ID is .370", OD is .540" if installed without base ring, OD is .550"+ with base ring.

There are two versions offered: 1" aluminum with no base ring, or .8" aluminum with a .2" plastic base ring.

Base rings are available in black/white/grey. They snap into the base of the the ferrules and can be turned down upon installation. Sets of 10 include 11 base pieces with the order, individually orders include a single base piece. 

These can be removed and reinstalled, (other than the base, that'll be deader than fried chicken after removal). If you plan to reuse the ferrule, make sure to not grab it with something that will mar or scratch the aluminum like pliers. We recommend a heat gun and heavy duty heat resistant work gloves.

The full 1” aluminum (no base ring) version weighs about 3.2g.   The version with the plastic base ring weighs about 2.5g (including the base ring).   A standard (1.3”) plastic BB&F ferrule weights about 2.3g.  Approximately 2 grams of head weight translates to 1 swing weight point.  So compared to a standard ferrule, these will add just a fraction of a swing weight point to a club.

 

USPS Priority shipping is included on orders of 10 or more pieces.

 

FAQ's:

What are these made of?
Aluminum.  
-Are they 3d printed?
No.  They are CNC machined. 
-What’s that ring at the bottom?
We make these ferrules in 2 styles: with and without a base ring.   The base ring is made of the same type of plastic as regular plastic ferrules and can be turned down so the ferrule sits perfectly flush with the hosel of the club.  The version without a base ring cannot be turned down (unless you have serious metalworking skills) but are designed to match the diameter of most club hosels (0.54”).
-Do I need to buy 10 at a time?
No.  You can buy as few as 1 ferrule of any design and mix and match your order however you see fit.
-How much do they weigh?   Will they change the swing weight of my clubs?
The full 1” aluminum (no base ring) version weighs about 3.2g.   The version with the plastic base ring weighs about 2.5g (including the base ring).   A standard (1.3”) plastic BB&F ferrule weights about 2.3g.  Approximately 2 grams of head weight translates to 1 swing weight point.  So compared to a standard ferrule, these will add just a fraction of a swing weight point to a club.
-How do you install them?
The same way you install plastic ferrules - with epoxy when you install the shaft into the club head.
-Will they fit .370” shafts?
They should.  We haven’t tested them on every shaft model on earth but we have tested them on quite a few and they fit every shaft we’ve tried.  If they are too small for your shafts please contact us to let us know.  We can give you some tips on how to get them to fit.
-Will they fit hybrids or fairway woods?
No.
-How do you remove them?
The same way you remove a shaft from a club head - heat it until the epoxy bond breaks and then pull it off.  If you plan to reuse the ferrule, make sure to not grab it with something that will mar or scratch the aluminum like pliers.  We recommend a heat gun and heavy duty heat resistant work gloves.
-Will they melt?
The melting point of Aluminum is 1220 degrees F or 660 degrees C.   A propane torch is capable of reaching these temps so if you use a torch to remove ferrules and shafts don’t apply the torch for an excessively long duration.  We recommend a heat gun instead,   The base rings are plastic and will melt just like any plastic ferrule.
-Can they be reused?
Yes!   The base rings cannot but we sell extra / replacement base rings.
-Do you take custom orders?
Yes!  If you supply your own artwork we will make you any design you’d like.  There is a one-time $50 setup fee per ferrule and after that you can have as few or as many ferrules of that design as you’d like for $10 per ferrule.   If you’d like us to create the artwork for you we can do it but the price will be quoted depending on the details. Just contact us to start the conversation.