Scarface (Silver)
$38.50
Interlagos (Ti)
$25.00
2-4 days delivery
Sold as Individual pieces.
ID is .370", OD is .540" if installed without base ring, OD is .550"+ with base ring.
There are two versions offered: .83” titanium with no base ring, or .83” titanium with a .17" plastic base ring.
Base rings are optional and allow club builders to turn down the ferrule to sit perfectly flush on the hosel. If used without a base ring quality of fit depends on the diameter of the hosel of your irons. Sets of 10 include 11 base rings with the order, individual orders include a single base ring per ferrule purchased.
These can be removed and reinstalled, (other than the base ring, that'll be deader than fried chicken after removal). If you plan to reuse the ferrule, make sure to not grab it with something that will mar or scratch the metal like pliers. We recommend a heat gun and heavy duty heat resistant work gloves.
The .83” titanium ferrule weighs about 3.9g. A .83” titanium ferrule plus a plastic base ring weights about 4.2g. A standard (1.3”) plastic BB&F ferrule weights about 2.3g. Approximately 2 grams of head weight translates to 1 swing weight point. So compared to a standard ferrule, these will add about 1 swing weight point to a club.
USPS Priority shipping is included on orders of 10 or more pieces.
FAQ's:
What are these made of?
Titanium.
-Are they 3d printed?
No. They are CNC machined.
-What’s that ring at the bottom?
We make these ferrules in 2 styles: with and without a base ring. The base ring is made of the same type of plastic as regular plastic ferrules and can be turned down so the ferrule sits perfectly flush with the hosel of the club. The version without a base ring cannot be turned down (unless you have serious metalworking skills) but are designed to match the diameter of most club hosels (0.54”).
-Do I need to buy 10 at a time?
No. You can buy as few as 1 ferrule of any design and mix and match your order however you see fit.
-How much do they weigh? Will they change the swing weight of my clubs?
The .83” titanium ferrule weighs about 3.9g. A .83” titanium ferrule plus a plastic base ring weights about 4.2g. A standard (1.3”) plastic BB&F ferrule weights about 2.3g. Approximately 2 grams of head weight translates to 1 swing weight point. So compared to a standard ferrule, these will add about 1 swing weight point to a club.
-How do you install them?
The same way you install plastic ferrules - with epoxy when you install the shaft into the club head.
-Will they fit .370” shafts?
They should. We haven’t tested them on every shaft model on earth but we have tested them on quite a few and they fit every shaft we’ve tried. If they are too small for your shafts please contact us to let us know. We can give you some tips on how to get them to fit.
-Will they fit hybrids or fairway woods?
No.
-How do you remove them?
The same way you remove a shaft from a club head - heat it until the epoxy bond breaks and then pull it off. If you plan to reuse the ferrule, make sure to not grab it with something that will mar or scratch the metal like pliers. We recommend a heat gun and heavy duty heat resistant work gloves.
-Will they melt?
No. The melting point of Titanium is over 3000 degrees F or 1660 degrees C. The base rings are plastic and will melt just like any plastic ferrule.
-Can they be reused?
Yes! The base rings cannot but we sell extra / replacement base rings.
-Do you take custom orders?
Yes! If you supply your own artwork we will make you any design you’d like. There is a one-time $50 setup fee per ferrule and after that you can have as few or as many ferrules of that design as you’d like for $25 per ferrule. If you’d like us to create the artwork for you we can do it but the price will be quoted depending on the details. Just contact us to start the conversation.
Scarface (Silver)
$38.50
Mauna Kea (.335")
$25.00
Cali Sober
$38.50
ForeRunner v2
$38.50
No Exit
$38.50